Panasonic HL-D3 Series User Manual page 208

●Status load
Accumulation status of measurement data can be checked.
Before loading the accumulated data, it is used to check the accumulation
status.When the status is checked, the controller gives the reply of the fo l-
lowing status.
Status
It is the status when buffering is not started at all after power
Non-buffering
supply or initialization, or when stop has occurred during
trigger standby after start of buffering.
Waiting for trigger It is the status waiting for trigger after start of buffering.
It is the status when measurement data is stored after start of
Accumulating buffering, or when measurement data is stored after trigger
occurrence.
It is the status when the data accumulation has reached the set
Completion of
number of accumulated data point or when buffering has
accumulation
stopped.
The following appears on the buffering screen of the HL-3SMI.
● Final data point
Accumulation status can be loaded in data quantity.
When "status load" is non-buffering, the "final data point" is "0".
Chapter 4 Description of Functions
Description
4-129
4