Panasonic HL-D3 Series User Manual page 191

Chapter 4 Description of Functions
No.
4
(4) Operation during meas-
(9) urement
(5) Shape waveform
(6)
(7) Graph 2 display
(6)
(7)
Item
Shape measurement
value
Graph 1 display
Graph 2 display
Button batch control
Display graph at 1:1 Sets the ratio between the X-axis and Z-axis scale
Calc. val. display
MSDS display
Zero set
Hold reset
Timing
Display hold
Display status
Switch axis
Flip vert.
Graph 1 display
Waveform
Description
Toggles the display/not display of (6) Shape meas.
val. group.
Toggles the display/not display of the Graph 1
display.
Toggles the display/not display of the Graph 2
display.
Links the operations of Zeroset, Hold Reset, Tim-
ing and Display hold, for OUT1, 2, 3, OUT-OUT
calculation 1 (OUT4), OUT-OUT calculation 2
(OUT5), total judgment (OUT6), and shape judg-
ment (OUT7).
of the graph display to 1:1.
Displays the source displacement data of the cal-
culation.
Opens the measurement value display screen for the
positions specified in multi-select displacement sens-
ing mode.
OUT1, 2, 3, OUT-OUT calculation 1 (OUT4),
OUT-OUT calculation 2 (OUT5), and shape judgment
(OUT7) are applicable.
Offsets the result so that the current measurement
value may be 0 by pressing the button. When the zero
set is ON, the letters are displayed in red.When the
button is pressed again, zero set is cancelled.
When the zero set input terminal is "ON", the letters
are also displayed in red.
The measurement value in hold measurement is reset
by pressing the button.
Stops the waveform calculation and judgment tempo-
rarily by pressing the button. When the timing is
"ON", the letters are displayed in red.
When the timing terminal is "ON", the letters are also
displayed in red.When the input terminal maintains
"ON", it cannot be turned "OFF" by pressing the
button.
Maintains display status of the current wave-
form.(Display is not updated.) The measurement is
continued.
When the display hold is "ON", the letters are dis-
played in red.
Displays the waveform display type (display current
value/display history).
Toggles the waveform display type (display current
value/display history).
Can flip the height (Z axis) of the saveform virtically.
Displays the waveform acquired from the device,
when the type of waveform displayed is the shape
4-112