Panasonic HL-D3 Series User Manual page 76

Start measurement
STEP5
Start measurement
Monitoring of
measurement and
judgment
Initialize
STEP6
Initialize
Save settings
STEP7
Save settings
Press the " Meas. start " button at the center of the main screen to
start measurement and judgment.
* "Online" display is changed to "Monitoring".
"4-4-1 Main Screen and Function at Start-up"
Press the "Meas. val. display" button at the upper part of the
main screen to display the measurement value window.
Calculation measurement values and judgment results of
OUT1to OUT3 are displayed.
"4-4-8 Measurement Value Display"
To make settings to the default status at the shipment, perform
"Initialize".
"3-2-5 Basic Operation of HL-D3SMI"
If the settings are not saved, the settings are erased when the
power is supplied again. Be sure to save the settings.
"3-2-5 Basic Operation of HL-D3SMI"
3-21
Chapter 3 Description of operation with HL-D3SMI
3