1-4 Installation Method
Before installing each device, read carefully the explanation of the setting
environment, concern about noise and radiation, and power supply.
Refer to "Correct Handling".
1-4-1 Controller
Installation by Using DIN Rail
The controller can be easily installed/uninstalled by
using 35mm width DIN rail (DIN EN50022) with
one-touch operation.
Installation
1
Hook the upper tab on the DIN rail.
2
Push the bottom of the controller until it clicks.
The installation of the controller is completed.
Removal
1
Insert the flathead screwdriver in the
mounting lever.
2
Pull down the mounting lever.
3
Raise the controller and remove it.
1-9
Chapter 1 Before Use
1