Panasonic HL-D3 Series User Manual page 181

Chapter 4 Description of Functions
No.
(1) Display language
(2) Display unit
(3)
Decimal places
(4)
Invalid clr val.
(5) CSV output
4
(6) Interpolation method (*)
(7)
Graph display method (*) Specifies the display method of the waveform.
(8)
Image baseline display
method
(9)
Controller settings
(10) Offline head spec.
(11) Settings
(12) Cancel
(*) These functions are explained on the following page.
Item
Output method
Number of segmented
lines
Left/right segmented
Row-col cvt.
Interpolation method
Changes the color of
interpolated data.
Description
Changes the language displayed.(Japanese, English or
Chinese)
Changes the unit displayed.(Currently "mm" only.)
Can specify the number of decimal places to use
when displaying measurement values.(2~4)
Sets the minimum line to show in black when the
detected light intensity image is displayed in color.
Changes the output method of buffering data to
batch/segment.
Uses "Segment" when the load size of lines is limited
on spreadsheet software.
Specifies the number of lines that segments the buff-
ering data output.
Uses "Left/right segmented" when the load size of
lines is limited on spreadsheet software for output of
the shape waveform data. The width data row is seg-
mented into two files of left and right data from the
center position (±0 mm) for output.
Outputs the width displacement for vertical axis and
the storage count for horizontal axis as the data line
in the CSV file.
Specifies the display interpolation method of the
invalid data for the waveform.
Specifies whether to change the color used to display
interpolated data.
Selects the method to display the line at the center
distance (±0 mm) of acquired images.
When this is checked, the set value in the sensor is
loaded in online or SEND to show the value on the
HL-D3SMI.
Displays the head setting screen in offline.
Selects the head type in offline to use it for setting of
the HL-D3SMI.
Determines settings.
Cancels settings.
4-102