Measurement Value Display On Panel - Panasonic HL-G1 A-C5 Series User Manual

 Measurement Value Display on Panel
The rightmost digits on the digital display can be turned OFF.
Setting
FULL All the digits are displayed.
Set 1 The rightmost digit is OFF.
Set 2 The rightmost two digits are OFF.
● Setting Procedure
1
Display the "Output Setting" screen
while the system is in setting mode.
2
Press the [ENTER] key. The "Judgment
Output Selection" screen will be
displayed.
3
Press the [DOWN] key five times. The

"Measurement Value Display on Panel"

screen will be displayed.
4
Press the [ENTER] key. The
"Measurement Value Display on Panel"
screen will be displayed.
5
Press the [UP]/[DOWN] key to make a
setting change for the measurement
value display on the panel. (Example:
Changing the present setting to Set 2.)
6
Press the [ENTER] key to determine the
setting for the measurement value
display on the panel.
● Set2 usage example
In this example "FULL" is changed to "Set2."
Function
3-27
Chapter 3 Function
Panel Display
3