Panasonic HL-D3 Series User Manual page 165

Chapter 4 Description of Functions
●Basic setting items of shape judgment
Item
Shape
Target head
Hold meas-
urement
Filter
4
●Setting items of reference value
Item
Zval. ref.
Xval. ref.
Detection Center
area of Ref. position
.
± range
Zval.
Processing
Detection Center
area of Ref. position
on the work
± range
Zval.
Processing
Selection Contents
No calculation (default val-
ue), calculation
Head A (default value), Head
B
Normal (default value), peak
hold, bottom hold, peak to
peak hold
None (default value), Median
3, 5, 7
Selection Contents
Reference area value (default
value), measurement value
on the work
Edge (Left to Right detect)
(default value), edge (Right
to Left detect), fixed
-6.25 - +6.25 [mm]
0 - 3 mm
(default value 0.5 [mm])
Average
(default value), maximum
value, minimum value
-6.25 - +6.25 [mm]
0 - 3 mm
(default value 0.5 [mm])
Average (default value),
maximum value, minimum
value
Description
Select the acquisition type of reference Z
value to detect the measurement value
and the edge.
Specify the head to be the calculation
target.
Specify normal and measurement value
hold for the step measurement value in
measurement positions 1-5.
Set the existence of the filtering process
in the time direction, and the median
filter size for the step measurement value
in measurement positions 1-5.
Select the acquisition type of
reference Z value to detect the
measurement value and the edge.
Select the detection direction or
fixed (X value reference is not
used) of the edge to be the ref-
erence.
Set the area of the Z value ac-
quisition to be the reference of
the measurement value and edge
detection, and the Z value pro-
cessing method.
Set the area of the Z value ac-
quisition to be the reference of
the measurement value, and the Z
value processing method.
This item can be set when the
Zval. ref. = "Meas. val. on the
work".
4-86
Description