Adjustments; Name And Function Of Each Section - Panasonic LA-511 Instruction Manual

7

Adjustments

<Name and function of Each Section>
Radiation Emission Indicator
[Projector]
●Remote Interlock Cord:
As required by the requirements of the Radiation Safety Standards, laser radiation stops when
it is left opened or connected to +V.
Laser is ready to radiate when it is connected to 0V.
●Radiation Emission Indicator:
This LED lamp glows while laser is energized.
[Detector]
●Comparison Level Adjustor:
The comparison level of the comparison output can be set as you like with the 18 turn adjustor.
●Span Adjustor:
Under all beam incoming state, the analog output voltage is set to +5V with the 18 turn
adjustor.
●Comparison Output:
It turns on when the analog output voltage of the sensor becomes lower than the comparison
level set with the comparison level adjustor.
●Operation Indicator:
When the comparison output is ON, the red LED glows.
●Beam Alignment Monitor:
This is available as a monitor when making beam alignment.
When beam axis is deviated from center, one or more yellow LED glows.
If overall beam is received, a green LED glows.
Beam Alignment Monitor Yellow LED ･･･ 4 PCS.
Green LED ･･･ 1 PC.
Operation Indicator
8
Comparison Level Adjustor
Span Adjustor