Panasonic HL-D3 Series User Manual page 107

Chapter 4 Description of Functions
 Ver1.1x→Ver1.2x (Controller, SMI)
●Function items added or changed
Controller
1) Memory switch and selection function
（ 16 memories and HL-D3SMI or RS232C command is used. ）
2) Addition and change of RS232C communication command


HL-D3SMI
1) Memory switch and selection function
2) All memory display and CSV saving for summary of sets
■ Ver1.2x→Ver2.0x (Sensor head, Controller ,
4
HL-D3SMI)
● Function items added or changed
Sensor head
1) Addition of X position correction function
2) Slope correction


3) Addition of mirror reflection coefficient setting
4) Addition of measurement area mask function
5) Addition of light intensity peak width limit
6) Change of width direction (X-axis) output unit
Controller
1) Addition of memory change input
2) Addition of calculation and judgment output OUT3
3) Addition of slope correction standard calculation to width calculation sele c-
tion
4) Compatibility of cross-sectional area calculation to the slope correction
standard calculation
5) Addition of direction attribution selection of edge detection
6) Addition of median filter
7) Addition of OUT-OUT calculation (OUT3 compatible)
8) Addition of total judgment (OUT-OUT logical calculation function)
9) Addition of shape judgment
Memory No. selection
Memory initialization (target memory or all memories)
Addition of angle hold mode
Addition of every measurement execution mode
4-28