Chapter 3 Description of operation with HL-D3SMI
Acquisition of detected light intensity image
1
3
2
The horizontal line at the center of the obtained image is the image reference line
indicating the center distance of the sensor.
Use of display or color can be changed in the "System settings".
If the beam image is not displayed for the workpiece, the following causes are
possible:
The distance with the workpiece is not appropriate.
The laser beam is OFF.
The workpiece reflection rate is small and the "Unit detection time" for the
The "Sensitivity adjustment" is fixed and the "Light emission rate" is small.
Check each setting for correct adjustment.
Click the "Detect image" button at the upper left of the main screen in
monitoring or online mode to display the detected light intensity image
screen.
Click the "Get image" button to obtain the detected light image under
the current setting conditions from the sensor.
head is not sufficient.
3-14