1-5-5 Installation of HL-D3SMI
1
Insert the HL-H3 Series Setup CD-ROM into the CD-ROM drive.
2
Follow the instructions on the setup screen.
Administrator authority is required to install or uninstall the HL-D3SMI
application.
3
Connect the controller and PC with the dedicated USB port connecting
cable.
4
Turn on the power of HL-D3C.
5
Select [Panasonic-ID SUNX Sensor] - [HL-D3SMI] from the Windows
Start menu.
* If it does not start automatically,
execute setup.exe in HL-D3Series
Setup CD-ROM.
1-15
Chapter 1 Before Use
1