Panasonic HL-D3 Series User Manual page 187

Chapter 4 Description of Functions
 Operation for acquisition of detected light in-
tensity image
When the detected light intensity image is acquired, the status of measur e-
ment is temporarily changed.
● In stop of measurement (online)
When "Get Image" is executed, the laser radiation intensity is changed. The
image is acquired and temporary measurement is performed.
Since judgment is temporarily performed, be careful for treatment of the te r-
minal output.
● In continuous measurement (monitoring)
When "Get image" is executed, measurement is temporarily stopped (online
status). Immediately after measurement, the data is unfixed.
Then, acquire the displacement shape waveform with image acquisition and
temporary measurement.
When acquisition is completed, continuous measurement is restarted (moni-
4
toring status).
 Display of acquisition image in each meas-
urement mode
The detected light intensity images acquired vary depending on selection of
the measurement mode and the sensitivity control conditions.
For the shape waveform, the measurement results according to the conditions
set for each measurement mode are acquired.
The reference line can be displayed at the center distance area of the acquired image.
Menu bar  "System"  "System settings"  "
method "
4-108
Image baseline display
Detected light intensity image
acquired with Ｘ range: ±5 mm
and Z range: ±5 mm
Image reference line (high-
lighted)