3-2 HL-D3SMI
3-2-1 Overview
The HL-D3 series has HL-D3SMI to facilitate use of settings and functions. (Install it
using the HL-D3 setup CD-ROM.)
The following functions can be achieved by connecting the HL-D3 (controller) and
the external control equipment (PC), using the USB cable. Control and analysis
function (data buffering) by accumulating/loading the data at the specified
sampling frequency can also be provided.
・ Determination of sensor head measuring mode and range, and setting of light
emission/reception condition
・ Measurement of shape calculation, determination of judgment condition, and
monitoring of measurement values and judgment results
・ Settings for I/O terminal
・ Settings for data buffering and data storage
3-2-2 Instruction for Installation
・ Before installing this software, please read the "3-1 Use Condition"
"Software License Agreement".
・ By installing the software, you are agreeing to be bound by the terms of
"Software License Agreement".
* For the installation method, refer to Chapter 1 "1-5-5 Installation of HL-D3SMI".
Chapter 3 Description of operation with HL-D3SMI
3-5
3