Page 1
Compact Laser Displacement Sensor HL-G1 SERIES * The contents of this catalog are as of October 2017. 2022.8 For the latest information, please visit our company website.
Page 2
Diffuse reflection type Specular reflection type HL-G103□ HL-G103A□ display that provides exceptional ease of use, the HL-G1 series will Measurement range: 30 ±4 mm Measurement range: 26.3 ±2 mm 1.181 ±0.157 in 1.035 ±0.079 in see use in a variety of applications on 0.5 μm...
HL-G1 SERIES Compact Laser Displacement Sensor APPLICATIONS Controlling the height of a Positioning of wafer Measuring the eccentricity of dispenser nozzle a metal shaft Detection of circuit board warpage Measurement of sheet thickness Testing sheet slack HL-G1 Circuit board BASIC PERFORMANCE Easy input settings while looking at digital display UP key 5-digit, 7-segment LED display...
Page 4
Width: 20.4 mm 0.803 in Amplifier separated type sensor Bending-resistant cable HL-G1 series IP67 protective enclosure protects from water and dust Thanks to its IP67 protective enclosure, the HL-G1 can be used in the presence of water and dust. Mounting holes are lined with metal sleeves, allowing the instrument to be tightened securely in place with up to 0.8 N·m of torque.
Page 5
Terms of use Software is available for download. Panasonic Industry offers no warranty for this software and is not liable for any loss or damage suffered as a result of its use or operation, Sensor configuration and evaluation software tool, HMI screen data, function blocks, etc.
HL-G1 SERIES Compact Laser Displacement Sensor ORDER GUIDE When using the high function type sensor, please order the extension cable separately. Measurement Beam Laser Type Appearance center distance and Resolution Model No. diameter class measuring range HL-G103-A-C5 Standard type 30 ±4 mm 0.5 μm 0.1 ×...
Page 7
INFORMATION OF INTERFACE CONVERTER The communications interface converter of HL-G1 series is RS-422 or RS-485. Use the HMI operator panel GT02 or GT12 (through mode) or the following interface converter when using the tool software HL-G1SMI and connecting to PC by USB.
HL-G1 SERIES Compact Laser Displacement Sensor SPECIFICATIONS Type Diffuse reflection type Specular reflection type HL-G103-A-C5 HL-G105-A-C5 HL-G108-A-C5 HL-G112-A-C5 HL-G125-A-C5 HL-G103A-RA-C5 HL-G105A-RA-C5 HL-G108A-RA-C5 Standard type HL-G103-S-J HL-G105-S-J HL-G108-S-J HL-G112-S-J HL-G125-S-J HL-G103A-RS-J HL-G105A-RS-J HL-G108A-RS-J Item High function type CE marking directive compliance EMC Directive, RoHS Directive Measurement center 30 mm...
Page 9
HL-G1 SERIES Compact Laser Displacement Sensor I/O CIRCUIT AND WIRING DIAGRAMS I/O circuit diagrams When selecting NPN output When selecting PNP output Color code Color code (Brown) + V (Brown) + V (Black) Output 1: OUT 1 Load 50 mA max. (Black) Output 1: OUT 1 (White)
Page 10
Stop bit length 1 bit Parity check None Termination code The HL-G1 can be connected to upper devices of RS-422/485. When upper device sends the request command, the HL-G1 series send the response command. Upper device HL-G1 series PLC etc. Request command...
Page 11
HL-G1 SERIES Compact Laser Displacement Sensor SENSING CHARACTERISTICS (TYPICAL) Correlation between measuring distance and error characteristics Diffuse reflection type Specular reflection type White ceramic White ceramic Alminum vapor deposition Aluminum vapor deposition Vertical orientation Horizontal orientation surface reflection mirror surface reflection mirror Vertical orientation Horizontal orientation −...
HL-G1 SERIES Compact Laser Displacement Sensor PRECAUTIONS FOR PROPER USE • Never use this product as a sensing device for HL-G1□-S-J / HL-G1□-A-C5 personnel protection. • This product is classified as a • In case of using sensing devices for personnel protection, Class 2 Laser Product in IEC / use products which meet laws and standards, such JIS standards and FDA*...
Page 13
HL-G1 SERIES Compact Laser Displacement Sensor PRECAUTIONS FOR PROPER USE Mutual interference (Unit: mm in) • When installing two or more sensor heads side by side, mutual interference will not occur if the laser spots from other sensor heads do not fall within the shaded areas in the figure below. HL-G103□...
Page 14
HL-G1 SERIES Compact Laser Displacement Sensor DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website. HL-G1□-A-C5 Sensor (Diffuse reflection / Standard type) 5.5 digit LED display (Red) OUT 1 indicator (Yellow) Measurement center Model No. θ distance (ℓ) Alarm indicator (Orange) OUT 2 indicator (Yellow)
Page 15
HL-G1 SERIES Compact Laser Displacement Sensor DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website. HL-G103A-RA-C5 HL-G103A-RS-J Sensor (Specular reflection / Standard type) Sensor (Specular reflection / High function type) 5.5 digit LED display (Red) 5.5 digit LED display (Red) OUT 1 indicator (Yellow) OUT 1 indicator (Yellow) Alarm indicator (Orange)
Page 16
Disclaimer The applications described in the catalog are all intended for examples only. The purchase of our products described in the catalog shall not be regarded as granting of a license to use our products in the described applications. We do NOT warrant that we have obtained some intellectual properties, such as patent rights, with respect to such applications, or that the described applications may not infringe any intellectual property rights, such as patent rights, of a third party. Panasonic Industry Co., Ltd. Industrial Device Business Division 7-1-1, Morofuku, Daito-shi, Osaka 574-0044, Japan industrial.panasonic.com/ac/e/ Specifications are subject to change without notice. ⓒ Panasonic Industry Co., Ltd. 2022.8 Printed in Japan...