Panasonic HL-D3 Series User Manual page 152

Calculation selection condition for width calculation (with height
correction)
X value [Z value
(convex at top
(1)
(Common max)),
shift] *1
X value [Z value
(convex at bottom
(2)
((Common min)),
shift] *1
*1 Selects from left X value(Calculation value 1) or Right X value(Calculation
value 2).
Reference of rising convex
shape(Common max. height)
①
The edge detection direction can not be specified. The edge detection is performed
towards the outside from the X position of the maximum value (minimum value).
Calculation selection condition for width calculation (simple
level specification)
X value [rising edge
(1)
(0 mm base)]
X value [falling edge
(2)
(0 mm base)]
Detection level
Sets the left and right edge detection levels at the
position shifted for the specified distance based on
the common maximum height in the specified
area, and obtains the width.
Sets the left and right edge detection levels at the
position shifted for the specified distance based on
the common minimum height in the specified area,
and obtains the width.
Reference of falling convex
shape（Common min. height）
Shift
Specifies the edge detection level with the simple
distance value for the rising edge and obtains the
edge position (X).
Specifies the edge detection level with the simple
distance value for the falling edge and obtains the
edge position (X).
②
①
4-73
Chapter 4 Description of Functions
Shift
②
Detection level
0.000mm
4