Panasonic HL-D3 Series User Manual page 68

 Initialization of set value in the sensor
This can erase the settings of the sensor and revert the value to the factory default
value (initial value).
1
Click the "Initialize" button of "Controller operation" on the left of the
main screen.
2
The dialog to confirm initialization appears. Select the range of the
memory for initialization.
3
To execute initialization, click the "OK" button. To cancel initialization,
click the "Cancel" button.
Set values after initialization is not saved in the memory before "Save" is executed.
(If the power is shut off without saving, the settings before initialization are
resumed.)
Chapter 3 Description of operation with HL-D3SMI
All set values in the sensor are the
settings in shipment from the factory.
For the initial value, refer to "4-3-2
Function List and Default Value".
"All":
"Selected memory": Only current memory
(memory selected) is
initialized.
"OK":
Memories of the selected range (all
memories or selected memory) are
initialized.
"Cancel": Initialization of memories is
canceled.
3-13
All selected memories
from M0 to M15 are
initialized.
3