Panasonic HL-D3 Series User Manual page 204

Chapter 4 Description of Functions
●Buffering rate
Settings that accumulate the measurement data for a long time with long a c-
cumulation interval based on the sampling cycle can be made.
The default value is "1 (Full measurement data)".
(When 4 is selected, measurement data is accumulated every 4 sampling cycles.)
When data buffering is used, the measurement value acquired from SMI is
updated at the sampling interval with the buffering rate.
Judgement in the sensor is operated on the sampling cycle of the head.
Example) When the sampling cycle is 5 ms and the buffering rate is 1000,
the display update cycle is 5 ms x 1000 = 5 sec.
4
4-125