Panasonic HL-D3 Series User Manual page 148

⑤
⑦
⑥
Calculation selection condition for width calculation and edge
position calculation (without position correction)
Calculation selection
condition
(1) X value [maximum Z]
(2) X value [minimum Z]
X value [start of rising
(3)
edge]
X value [end of rising
(4)
edge]
X value [start of falling
(5)
edge]
X value [end of falling
(6)
edge]
X value [ALM→Z]
(7)
X value [Z→ALM]
(8)
④
⑤
Detection level
⑥ ② ③
Specified range
Detection level
Detection level
Obtains the width position which is the maximum
height in the specified area.
Obtains the width position which is the minimum
height in the specified area.
Obtains the width value at the rising edge start
point.
Obtains the width value at the rising edge end point.
Obtains the width value at the falling edge start
point.
Obtains the width value at the falling edge end
point.
Point changed from no height data (alarm) to height
data when viewed from the left end of the specified
area.
Point changed from no height data (alarm) to height
data when viewed from the left end of the specified
area.
①
Detection level
4-69
Chapter 4 Description of Functions
①
④
③
②
Description
⑧ ⑦
4