Cbcycle Group - YOKOGAWA WT3000 User Manual

6.4

CBCycle Group

The CBCycle group contains commands related to Cycle by Cycle measurement functions.
These commands allow you to enter and query the same settings that are available under ITEM in the "CbyC Items"
menu and under FORM in the "CbyC Form" menu on the front panel.
Note that the commands in this group are only available with the Cycle by Cycle function (/CC option).
:CBCycle?
Function Queries all settings related to the Cycle by
Cycle measurement function.
Syntax :CBCycle?
Example :CBCYCLE? -> :CBCYCLE:SYNCHRONIZE:
SOURCE U1;SLOPE RISE;:CBCYCLE:
TRIGGER:MODE AUTO;SOURCE U1;
SLOPE RISE;LEVEL 0.0;:CBCYCLE:
COUNT 100;TIMEOUT 10;FILTER:LINE:
ELEMENT1 50.0E+03;
ELEMENT2 50.0E+03;
ELEMENT3 50.0E+03;ELEMENT4 50.0E+03
:CBCycle:COUNt
Function Sets the number of cycles for Cycle by Cycle
measurement or queries the current setting.
Syntax :CBCycle:COUNt {<NRf>}
:CBCycle:COUNt?
<NRf> = 1 to 3000 (number of measured cycles)
Example :CBCYCLE:COUNT 100
:CBCYCLE:COUNT? ->
:CBCYCLE:COUNT 100
:CBCycle:DISPlay?
Function Queries all settings related to the Cycle by
Cycle display.
Syntax :CBCycle:DISPlay?
Example :CBCYCLE:DISPLAY? ->
:CBCYCLE:DISPLAY:ITEM1 FREQ;
ITEM2 U,1;ITEM3 I,1;ITEM4 P,1;
ITEM5 S,1;CURSOR 1
:CBCycle:DISPlay:CURSor
Function Sets the cursor position of the Cycle by Cycle
display or queries the current setting.
Syntax :CBCycle:DISPlay:CURSor {<NRf>}
:CBCycle:DISPlay:CURSor?
<NRf> = 1 to 3000 (cursor position)
Example :CBCYCLE:DISPLAY:CURSOR 1
:CBCYCLE:DISPLAY:CURSOR? ->
:CBCYCLE:DISPLAY:CURSOR 1
Description • Specifies the cursor position by the cycle
number.
• You can make the same setting or query with
the ":DISPlay:CBCycle:CURSor"
command.
IM 760301-17E
:CBCycle:DISPlay:ITEM<x>
Function Sets the displayed items (function and element)
of the Cycle by Cycle display or queries the
current setting.
Syntax :CBCycle:DISPlay:
ITEM<x> {<Function>,<Element>}
:CBCycle:DISPlay:ITEM<x>?
<x> = 1 to 5 (item number)
<Function> = {FREQ|U|I|P|S|Q|LAMBda|
SPEed|TORQue|PM}
<Element> = {<NRf>|SIGMA|SIGMB} (<NRf>
= 1 to 4)
Example :CBCYCLE:DISPLAY:ITEM1 U,1
:CBCYCLE:DISPLAY:ITEM1? ->
:CBCYCLE:DISPLAY:ITEM1 U,1
Description • When <Function> = {FREQ|SPEed|
TORQue|PM}, <Element> need not be
specified.
<Element> is omitted from the response.
• When <Element> is omitted, Element 1 is set.
• {SPEed|TORQue|PM} is only available with
the motor version (-MV).
• You can make the same setting or query with
the ":DISPlay:CBCycle:ITEM<x>"
command.
:CBCycle:DISPlay:PAGE
Function Sets the number of the displayed page of the
Cycle by Cycle display or queries the current
setting.
Syntax :CBCycle:DISPlay:PAGE {<NRf>}
:CBCycle:DISPlay:PAGE?
<NRf> = 1 to 150 (page number)
Example :CBCYCLE:DISPLAY:PAGE 1
:CBCYCLE:DISPLAY:PAGE? ->
:CBCYCLE:DISPLAY:PAGE 1
Description • When a page number is set, the cursor
moves to the top of the specified page.
• You can make the same setting or query with
the ":DISPlay:CBCycle:CURSor"
command.
1
2
3
4
5
6
7
App
Index
6-21