Configuring/Address Space; Operating With "Counting And Measurement" Technology Object; Configuring - Siemens SIMATIC S7-1500/ET 200МР Manual

Configuring/address space

4.1

Operating with "Counting and measurement" technology object

4.1.1

Configuring

Introduction
You configure the technology module and assign its parameters with STEP 7 (TIA Portal).
The technology object is used to control and monitor the functions of the technology
module.
System environment
The technology module can be used in the following system environments:
Applications Components required
Central operation
•
with an S7-1500 CPU
•
Distributed operation
•
with an S7-1500 CPU
•
•
22
S7-1500 automation system
TM Count 2x24V
S7-1500 automation system
ET 200MP distributed I/O sys-
tem
TM Count 2x24V
Configuration software
STEP 7 (TIA Portal):
• Device configuration with
hardware configuration
• Parameter setting with
High_Speed_Counter technol-
ogy object
Technology module TM Count 2x24V (6ES7550-1AA01-0AB0)
Equipment Manual, 12/2020, A5E31870371-AC
4
In the user program
High_Speed_Counter in-
struction