ETC PENKO SGM800 Manual page 90

MANUAL SGM800
Starting at firmware version 1.6.0.9.0.3 a backup of the device configuration can
be made within the device. A password is required for the backup.
Contact PENKO for this password.
The backup can only be made using Pi Mach II manage. Enter the password in the
service code field.
The backup can be made in the Factory Recall menu.
Restore Parameters only restores the non-certified parameters. This option is also
available in the device menu, RCL menu, option RCL 2.
Restore Full restores all parameters. This option is also available in the de- vice menu,
RCL menu, option RCL 3.
The device restarts after a restore action.
90