Multiple Range And Multi-Interval Modes - ETC PENKO SGM800 Manual

MANUAL SGM800
1.3

Multiple Range and Multi-Interval modes

There are three parameters in the configuration software (see paragraph 1.8 PI Mach II
software) to modify the behavior from Multiple Range and Multi-Interval. The three parameters
are listed in the table below.
Parameter
Range
Max step
Mode
The output LED's are used to show the active range for both ranges when a range of more than 0
parts and Certified mode are selected. The output LED's are used to show the active interval as
described below.
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
3 4
3 4
3 4
3 4
3 4
3 4
3 4
3 4
3 4
Value(s)
Range size as integer
1, 2, 5, 10, 20, 50, 100, 200, 500
Multiple-Range, Multi-Interval
e1
e2
e3
e4
e5
e6
e7
e8
e9
13