Table of Contents
Advertisement
MANUAL SGM800
2.1.7 Menu –232-
232 RS232 Port settings (SGM850 only)
In this menu, the communication settings can be set for RS232 communication.
Options are:
232 1
232 2
232 3
232 4
232 5
232 6
Press key 2 <2 sec to enter the RS232 port settings.
The following screen will be visible:
In 232 1 you set the RS232 Protocol of the SGM850. Press key 2 <2 sec. to en- ter 232 1.
Set the Prot using key 1 and key 2 confirm by pressing key 3 >2 sec.
(options are: 1= None, 2= Printer, 3= ASCII, 4= NPV Slave, 5= Modbus-RTU, 6= Modbus
ASCII). For protocol descriptions please download PENKO Suite from www.penko.com
Increase Decrease Confirm
When confirmed the following screen will be visible:
Protocol
Address
Stopbits
Parity
Baudrate
Indicator
51
Advertisement
Table of Contents
