ETC PENKO SGM800 Manual page 66

MANUAL SGM800
Use key 1 and 2 to change the value. Key 1 is for changing the number (1-9), key
2 is for changing the position of the cursor. Confirm by pressing key 3 for >2 sec.
Up Down Left Right Confirm
The following screen is visible:
In rng 2 you set the maximum auto range step size. Set the biggest step size al- lowed.
Choose between 1, 2, 5, 10, 20, 50, 100, 200 and 500.
To change the maximum step size press key 2 < 2 sec.
The following screen is visible:
Use key 1 change the filter. Key 1 is for changing the number.
Confirm by pressing key 3 for >2 sec.
Up Down Confirm
66