MANUAL SGM800
In 232 2 you set the RS232 address of the SGM850. Press key 2 <2 sec. to enter 232 2 Set
the address using key 1 and key 2 confirm by pressing key 3 >2 sec.
(options are: 0-255).
Increase Decrease
When confirmed the following screen will be visible:
In 232 3 you set the RS232 stopbits of the SGM850. Press key 2 <2 sec. to enter 232 3.
Set the number of stopbits the protocol needs by using key 1 and key 2 confirm by
pressing key 3 >2 sec. (options are: 1-2).
Increase Decrease Confirm
When confirmed the following screen will be visible:
Left
Right
Confirm
52