ETC PENKO SGM800 Manual page 24

MANUAL SGM800
The following screen appears:
In the Usb tab sheet click Discover, select the SGM800 Digitizer and click OK. If this
doesn't work, make sure other USB devices like mobile phones are disconnected
from the PC.
In case of Windows 8, a USB driver manual is available in the Penko Suite.
In the communication setup it's also possible to connect the SGM820 through
Ethernet. Set the IP-address of the SGM820 in range with the PC (see chapter
6.5 of this manual) and fill in the IP-address in tab "Ethernet".
When communication is established go to Manage.
The following tree is shown:
24