ETC PENKO SGM800 Manual page 45

MANUAL SGM800
Increase Decrease
When confirmed the following screen will be visible:
In Sub 1 you set the first three numbers of the Subnet address you want to give the
SGM820 (example: 255.255.255.000). Use key 1 and key 2 to change the number Key 1
is for changing the number (1-9), key 2 is for changing the position of the cursor.
Confirm by pressing key 3 >2 sec.
Increase Decrease
When confirmed the following screen will be visible:
In Sub 2 you set the second three numbers of the Subnet address you want to give the
SGM820 (example: 255.255.255.000). Use key 1 and key 2 to change the number Key 1
is for changing the number (1-9), key 2 is for changing the po- sition of the cursor.
Confirm by pressing key 3 >2 sec.
Increase Decrease
When confirmed the following screen will be visible:
In Sub 3 you set the third three numbers of the Subnet address you want to give the
SGM820 (example: 255.255.255.000). Use key 1 and key 2 to change the number Key 1
is for changing the number (1-9), key 2 is for changing the position of the cursor.
Left Right Confirm
Left Right Confirm
Left Right Confirm
45