ETC PENKO SGM800 Manual page 55

MANUAL SGM800
2.1.8 Menu –422-
422 RS422 Port settings (SGM850 only)
In this menu, the communication settings can be set for RS422 communication.
Options are:
422 1
422 2
422 3
422 4
422 5
422 6
Press key 2 <2 sec to enter the RS422 port settings.
The following screen will be visible:
In 422 1 you set the RS422 Protocol of the SGM850. Press key 2 <2 sec. to
enter 422 1. Set the Prot using key 1 and key 2 confirm by pressing key 3 >2 sec.
(options are: 1= None, 2= Printer, 3= ASCII, 4= NPV Slave, 5= Modbus-RTU, 6= Modbus
ASCII).For protocol descriptions please download PENKO Suite from www.penko.com
Increase Decrease Confirm
When confirmed the following screen will be visible:
Protocol
Address
Stopbits
Parity
Baudrate
Indicator
55