Configuration Menu - ETC PENKO SGM800 Manual

MANUAL SGM800
2.1

Configuration Menu

Press button 3 >2 sec to enter the Configuration Menu.
In the Configuration Menu the following options are available:
- - - Fun
- - - ACn
- - - Fun
- - - dAC
- - - ACn
- - - dAC
- - - Eth
- - - 485
- - - CAn
- - - Eth
- - - - Pb
- - - CAn
- - - 232
- - - - Pb
- - - 422
- - - 232
- - - Ind - - - Ind
- - - 422
- - - rng
- - - rng
- - - FIL - - - FIL
- - - dSF
- - - dSF
- - - PCL
- - - PCL
- - - CAL - - - CAL
- - - tCL
- - - tCL
- - - gCL - - - gCL
- - - CLo - - - CLo
- - - rcL - - - rcL
- - - SoF - - - SoF
Scroll thru the menu options pressing key 1 and enter a sub-menu pressing key 2
<2 sec.
setpoint function settings (not for SGM810 or controller)
setpoint action settings (not for SGM810 or controller)
setpoint function settings (not for SGM810)
Analog output settings
setpoint action settings (not for SGM810)
Analog output settings
Ethernet settings (SGM820 only)
Local bus communication settings (RS485)
Can bus port settings (SGM830 only)
Ethernet settings (SGM820 only)
Profibus settings (SGM840 only)
Can bus port settings (SGM830 only)
RS232 port settings (SGM850 only)
Profibus settings (SGM840 only)
RS422 port settings (SGM850 only)
RS232 port settings (SGM850 only)
Indicator settings Indicator settings
RS422 port settings (SGM850 only)
Multi range/interval settings
Multi range/interval settings
Filter settings Filter settings
Digital filter settings
Digital filter settings
Pre-calibration settings
Pre-calibration settings
Calibration settings Calibration settings
Theoretic calibration
Theoretic calibration
Geographic calibration Geographic calibration
Date and time configuration (SGM850 only) Date and time configuration
Recall Recall
Firmware update Firmware update
34