ETC PENKO SGM800 Manual page 85

MANUAL SGM800
2.1.16 Menu -gCL-
gCL Geographic calibration
In this menu, the Geographic calibration settings can be set. Here you can set a geographic
information of the loadcells filled in al tCL. Options are:
gCL 1
gCL 2
gCL 3
gCL 4
Press key 2 <2 sec to enter the Geographic calibration settings.
The following screen is visible:
In gcL 1 you can set the origin latitude of the loadcell. This is the geographic latitude of
where the loadcell is manufactured. Press key 2 <2 sec. to set the origin latitude.
The following screen is visible:
Use key 1 and key 2 to enter the origin latitude of the loadcell(s). Key 1 is used for
changing the number (1-9), key 2 is used for changing the position of the
cursor. And press key 3 >2 sec.to set the origin latitude. Choose value
between –90,00 and 90,00°
Origin latitude
Origin elevation
Location latitude
Location elevation
85