ETC PENKO SGM800 Manual page 56

MANUAL SGM800
In 422 2 you set the RS422 address of the SGM850. Press key 2 <2 sec. to enter 422 2 Set
the address using key 1 and key 2 confirm by pressing key 3 >2 sec.
(options are: 0-255).
Increase Decrease
When confirmed the following screen will be visible:
In 422 3 you set the RS422 stopbits of the SGM850. Press key 2 <2 sec. to enter 422 3.
Set the number of stopbits the protocol needs by using key 1 and key 2 confirm by
pressing key 3 >2 sec. (options are: 1-2).
Increase Decrease Confirm
When confirmed the following screen will be visible:
In 422 4 you set the RS422 Parity of the SGM850. Press key 2 <2 sec. to enter 422 4 Set
the Parity using key 1 and key 2 confirm by pressing key 3 >2 sec.
(options are: 1= none, 2= odd, 3= even, 4= mark, 5=space).
Increase Decrease Confirm
Left Right Confirm
56