ETC PENKO SGM800 Manual page 38

MANUAL SGM800
2.1.3 Menu -dAC-
dAC Analog output settings
In this menu, all analog output parameters can be set (only for SGM810 or when the
analog output option is installed) options are:
dAC 1
dAC 2
dAC 3
dAC 4
dAC 5
dAC 6
dAC 7
Press key 2 <2 sec to enter the analog output settings.
The following screen is visible:
In dAC 1 you can set the analog output to its minimum level for testing
purpose.Press key 2 <2 sec to set the analog output to minimum.
Press key 3 <2 sec to go back.
The following screen is visible:
Set analog output to minimum level
Set analog output to maximum level
Set analog output to level in percetage
Analog output weigher mode
Zero value for minimum analog output
End value for maximum analog output
Analog output range
38