ETC PENKO SGM800 Manual page 88

MANUAL SGM800
2.1.17 Menu -CLo-
CLo Date and time configuration In Clock, you can set the internal date
and time. Press key 2 <2 sec to enter Clock.
The following screen is visible:
Set the date. Use key 1 and key 2 to change the number Key 1 is for changing the
number (1-9), key 2 is for changing the position of the cursor. Confirm by pressing
key 3 >2 sec. Format DD.MM.YY
The following screen is visible:
Set the time. Use key 1 and key 2 to change the number Key 1 is for changing the
number (1-9), key 2 is for changing the position of the cursor. Confirm by pressing
key 3 >2 sec. Format HH.MM.SS
Up Down Left Right Confirm
88