ETC PENKO SGM800 Manual page 35

MANUAL SGM800
2.1.1 Menu -Fun-
Fun setpoint function settings (not for SGM810 or controller) Configure the weigher mode
the outputs has to swithch on press key 2 <2 sec to enter the setpoint function settings menu.
Select the output you want to configure pressing key 1 <2 sec. Fun 1= output 1, Fun 2=
output 2, Fun 3= output 3 and Fun 4= output 4. Confirm the selected output
by pressing key 2 <2 sec.
The following screen is visible:
Scroll thru the weigher function options pressing key 1 and select which weigher mode
is needed by pressing key 3 >2sec. (options are: 1-19)
1 Weigher
2 Fast gross
3 Fast net
4 Display Gross
5 Display Net
6 Tare
7 Peak
8 Valley
9 Hold
For further details on the weigher functions check appendix I
10 Weigher x 10
11 Fast gross x 10
12 Fast Net x 10
13 Display Gross x 10
14 Display Net x 10
15 Tare x 10
16 Peak x 10
17 Valley x 10
18 Hold x 10
19 Signal
Up Down Confirm
35