ETC PENKO SGM800 Manual page 42

MANUAL SGM800
When confirmed the following screen will be visible:
2.1.4 Menu -485-
Local bus communication settings (RS485)
In this menu, the communication address can be set for communication with
multiple devices. Press key 2 <2 sec to enter the settings.
The following screen will be visible:
In 485 1 you set the address of the SGM800. Press key 2 < 2sec. to enter 485 1.
Set the address using key 1 and key 2.. Key 1 is for changing the number (1-9),
key 2 is for changing the position of the cursor. Confirm by pressing key 3 >2sec.
(options are: 1-32).
42