ETC PENKO SGM800 Manual page 46

MANUAL SGM800
Confirm by pressing key 3 >2 sec.
Increase Decrease
Wen confirmed the following screen will be visible:
In Sub 4 you set the fourth three numbers of the Subnet address you want to give the
SGM820 (example: 255.255.255.000). Use key 1 and key 2 to change the number Key 1 is
for changing the number (1-9), key 2 is for changing the position of the cursor. Confirm
by pressing key 3 >2 sec.
Increase Decrease
When confirmed the following screen will be visible:
In gAt 1 you set the first numbers of the Gateway address you want to give the SGM820
(example: 192.168.001.001). Use key 1 and key 2 to change the number Key 1 is for
changing the number (1-9), key 2 is for changing the position of the cursor. Confirm by
pressing key 3 >2 sec.
Increase Decrease
When confirmed the following screen will be visible:
Left Right Confirm
Left Right Confirm
Left Right Confirm
46