ETC PENKO SGM800 Manual page 39

MANUAL SGM800
In dAC 2 you can set the analog output to its maximum level for testing
purpose. Press key 2 <2 sec to set the analog output to maximum. Press key 3 <2 sec to
go back.
The following screen is visible:
In dAC 3 you can set the analog output to a level you want for testing purpose. Press
key 2 <2 sec.
Fill in the wanted percentage (0000,00-0100,00 using key 1 and key 2. Key 1 is for
changing the number (1-9), key 2 is for changing the position of the cursor. Confirm by
pressing key 3 >2 sec. Press key 3 <2 sec. to go back and reset the analog output.
Increase Decrease Left Right Confirm Go back
The following screen is visible:
In dAC 4 you set the weigher mode that the analog output is based on. Press key 2 <
2sec. to enter dAC 4. Scroll thru the weigher function options pressing key 1 and select
which weigher mode is needed by pressing key 3 >2sec. (options are: 1-19)
Increase Decrease Confirm
39