ETC PENKO SGM800 Manual page 44

MANUAL SGM800
Increase
When confirmed the following screen will be visible:
In Adr 2 you set the second three numbers of the IP address you want to give the SGM820
(example: 192.168.151.112). Use key 1 and key 2 to change the num- ber Key 1 is for
changing the number (1-9), key 2 is for changing the position of the cursor. and confirm
by pressing key 3 >2 sec.
Increase Decrease
When confirmed the following screen will be visible:
In Adr 3 you set the third three numbers of the IP address you want to give the
SGM820 (example: 192.168.151.112). Use key 1 and key 2 to change the number Key 1
is for changing the number (1-9), key 2 is for changing the position of the cursor.
Confirm by pressing key 3 >2 sec.
Increase Decrease
When confirmed the following screen will be visible:
In Adr 4 you set the fourth three numbers of the IP address you want to give the SGM820
(example: 192.168.151.112). Use key 1 and key 2 to change the num- ber Key 1 is for
changing the number (1-9), key 2 is for changing the position of the cursor. Confirm by
pressing key 3 >2 sec.
Decrease Left
Left
Left
Right Confirm
Right Confirm
Right Confirm
44