ETC PENKO SGM800 Manual page 47

MANUAL SGM800
In gAt 2 you set the second three numbers of the Gateway address you want to give the
SGM820 (example: 192.168.001.001). Use key 1 and key 2 to change the number Key 1
is for changing the number (1-9), key 2 is for changing the po- sition of the cursor.
Confirm by pressing key 3 >2 sec.
Increase Decrease
When confirmed the following screen will be visible:
In gAt 3 you set the third three numbers of the Gateway address you want to give the
SGM820 (example: 192.168.001.001). Use key 1 and key 2 to change the number Key 1
is for changing the number (1-9), key 2 is for changing the position of the cursor.
Confirm by pressing key 3 >2 sec.
Increase Decrease
When confirmed the following screen will be visible:
In gAt 4 you set the fourth three numbers of the Gateway address you want to give the
SGM820 (example: 192.168.001.001). Use key 1 and key 2 to change the number Key 1
is for changing the number (1-9), key 2 is for changing the po- sition of the cursor.
Confirm by pressing key 3 >2 sec.
Increase Decrease
Left Right Confirm
Left Right Confirm
Left Right Confirm
47