Occupied Bandwidth Measurements - Keysight X Series Measurement Manual

Making MSR Measurements
MSR Downlink Signal Measurement

Occupied Bandwidth Measurements

This section explains how to make the Occupied Bandwidth measurement on
MSR downlink signal. The instrument measures power across the band, and
then calculates its 99.0% power bandwidth. For more information on this
measurement, see
page
For signal setting, see
Measurement Procedure
Step
1. Perform the common
configuration.
2. Initiate the Occupied
Bandwidth
measurement.
Figure 2-12 MSR Downlink Occupied BW Measurement Result
26
"Occupied Bandwidth Measurement Concepts" on
55.
"Setting the Downlink Signal" on page
Action
"Common Measurement
See
Procedure (Downlink)" on
page 16
.
Meas Occupied BW
Press ,
Notes
It is not necessary if you already did it in
other measurements.
A Spectrum display is shown, with white
.
vertical lines to indicate the various offset
settings, and a measurement summary
below. The Occupied BW measurement
results should look like
Keysight N9083A & W9083A Measurement Guide
14.
Figure 2-10
.