Record Playback Example (Rtsa Mode Only) - Keysight N9913A User Manual

RTSA (Real-Time Spectrum Analyzer) Mode—Option 350 (CPU2 Only)
Record/Playback (RTSA Option)
— Then choose from the following:
—

Record Playback Example (RTSA Mode Only)

The following "Interval Recording" example shows how you can record spectral
activity over a longer period of time with less trace storage.
— Press Trace 6
— Then
— Then
— Then
— Then
— Then
— Then
— Then
— Then
This session can be played back: For example:
— Press Trace 6
— Then
— Then
Keysight N9927-90001 User's Guide
Rename Using the FieldFox labeler, change the name of the session.
AutoSession (n) is the default name where (n) is the next-available number.
Learn more in "How to use the FieldFox labeler " on page
— Sort Arrange the listing of sessions
Sort can also be used during a Recall Session, before choosing a
session to open.
— Delete After a confirmation prompt, removes the contents of the
selected session from the list.
— Copy Copies the selected session to a different storage device, or the
same storage device with 'Copy(n)_' appended to the beginning of
the name so that duplication is prevented.
— Copy All Copies ALL of the listed sessions to a different storage
device, or the same storage device with 'Copy(n)_' appended to the
beginning of the names so that duplication is prevented.
— Delete All Deletes ALL of the listed sessions.
Record Playback
New Session
Recording Configuration
Record Source to Trace1
Back
Recorder Player
Record let the recorder run for several seconds.
Stop to end the recording.
Record Playback
Play
508.
by Name, by Date, or by Size.
233