Setting Up A Seca 360° Wireless Connection; Introduction; Activating/Deactivating The Seca 360° Wireless Module - Seca mVSA 535 Instructions For Use Manual

5.5 Setting up a seca 360° wireless connection

Introduction

Activating/deactivating the
seca 360° wireless module
146 •
seca mVSA 535
➔
Introduction
➔
Activating/deactivating the seca 360° wireless module
➔
Setting up a seca 360° wireless connection
If you use devices from the
a measuring station, you can connect them to the
submit the parameters height and weight directly to the device and adopt
them in a seca patient file.
1. Measure
1. Messen
2. Submit
2. Senden
Example display:
Beispiel-Darstellung:
seca 285
Messstation seca 285 mit seca mVSA 535
In order to be able to communicate with devices from the
system, the
seca 360° wireless
vated and a wireless group set up.
NOTE
• The device can only receive data, not transmit it, via the
seca 360° wireless
• Follow the instructions in this section to achieve a stable connection
of the desired
seca 360° wireless
undesired integration of other devices.
• You should also follow the instructions for use for the
seca 360° wireless
1. Press the Peripherals tab.
seca 360° wireless system in your institution, e.g.
seca mVSA 535
3. Receive
3. Empfangen
4. Adopt
4. Übernehmen
seca mVSA 535
measuring station with
module of the
seca mVSA 535
connection.
devices and to prevent the
system devices being used.
. You can
seca 360° wireless
must be acti-