Setting Up Peripherals; Setting Up A Lan Connection To The Network (Stationary Operation); Introduction; Activating The Lan Connection - Seca mVSA 535 Instructions For Use Manual

5. SETTING UP PERIPHERALS

5.1 Setting up a LAN connection to the network (stationary operation)

Introduction

Activating the LAN connection

➔
Setting up a LAN connection to the network (stationary operation)
➔
Setting up a WiFi connection (mobile operation)
➔
Setting up a connection to the seca analytics 115 PC software
➔
Setting up a connection to the seca connect 103 software
➔
Setting up a seca 360° proximity connection
➔
Setting up a seca 360° wireless connection
➔
Introduction
➔
Activating the LAN connection
➔
Deactivating the LAN connection
For stationary use, for example in a treatment room at your practice, you can
connect the monitor to your LAN network to exchange data with the
seca analytics 115 PC software or the
A requirement for exchanging data with the
is that the
seca analytics 115
alone PC and the network configuration (UDP or DHCP) is known.
A requirement for exchanging data with the
that the
seca connect 103
tion of the
seca connect 103
seca mVSA 535
Monitor
1. Press the Peripherals tab.
seca connect 103
seca analytics 115
PC software is installed on a server or stand-
seca connect 103
software is installed on a server and the configura-
software (server IP and connect port) is known.
LAN LAN
LAN-Router
Setting up peripherals • 131
English
.
PC software
software is
seca 115
Server/Stand-Alone-PC