Presets for temperature
TM
TM
(COVIDIEN
FILAC
3. Press the SpO
The presets are displayed (in this case: Masimo SET
4. Press the desired sensitivity:
Normal
Adaptive Probe Off Detection
(APOD)
Maximum
5. Press the Confirm button.
The dialog window closes.
The modified settings are adopted.
1. Press the Settings tab.
3000 only)
button.
2
NOTE
The Maximum setting (Masimo SET
as a preset. Select this setting for each measurement directly
➔
Measuring oxygen saturation (SpO
Masimo SET
Mode
Making settings for measuring mode • 123
®
pulse oximetry):
®
pulse oximetry) is not available
).
2
®
SpO
module
2
Indication
• Normal perfusion
• Mild perfusion disorders
Vigorous patient movements
• Poor perfusion
• Severely disrupted signal, for
example due to indoor lighting or
direct sunlight
English