Remote - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

4.9.7.3

Remote

On this WBM page, you configure the partner (OpenVPN end point). Per connection, you can
specify several OpenVPN partners. The device tries all configured OpenVPN partners one
after the other until a connection is successfully established.
Description
The page contains the following:
● Remote Name
Enter a name for the OpenVPN partner and click "Create" to create a new partner.
This table contains the following columns:
● Select
Select the check box in the row to be deleted.
● Name
Shows the name of the Open VPN partner.
● Connection
Select the corresponding connection. Only connections can be configured that have been
configured on the "Connections" WBM page.
● Remote Address
Enter the WAN IP address or the DNS host name of the OpenVPN partner.
● Port
Specify the port via which the OpenVPN tunnel can communicate. The setting applies
specifically to the specified port.
● Protocol
Specify the protocol for which the OpenVPN connection will be used.
● Proxy
Specify whether the OpenVPN tunnel to the defined OpenVPN partner is established via a
proxy server. Only the proxy servers can be selected that you configured in "System > Proxy
Server".
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08
Configuring with Web Based Management
4.9 "Security" menu
295