Configuration; Remote Access - Siemens SINAUT MD741-1 System Manual

Configuration

Configuration of the router and firewall functions is carried out locally or remotely
via the Web-based administration interface of the SINAUT MD741-1.
Remote configuration
Remote configuration via HTTPS or CSD access is only possible if the SINAUT
MD741-1 is configured for remote access. In this case proceed exactly as
described in Chapter 8.
Configuration via the local interface
The preconditions for configuration via the local interface are:
The computer (Admin PC) that you use to carry out configuration must be
●
either connected directly to the Ethernet jack of the SINAUT MD741-1 via a
network cable or it must have direct access to the SINAUT MD741-1 via the
local network.
The network adapter of the computer (Admin PC) that you use to carry out
●
configuration must have the following TCP/IP configuration:
IP address: 192.168.1.2
Subnet mask: 255.255.255.0
Instead of the IP address 192.168.1.2 you can also use other IP addresses
from the range 192.169.1.x.
If you also wish to use the Admin PC to access the external network via the
●
SINAUT MD741-1, the following additional settings are necessary:
Standard gateway: 192.168.1.1
Preferred DNS server: Address of the domain name server
23
3
SINAUT MD741-1
C79000- G8976-C212