System" Menu; Configuration - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Description of the displayed values
The table has the following columns:
● Group
Shows the name of the group. The name matches the group on the RADIUS server.
● Role
Shows the name of the role. Users who are authenticated with the linked group on the
RADIUS server receive the rights of this role locally on the device.
● Description
Shows a a description for the link.
4.5

"System" menu

4.5.1

Configuration

System configuration
The WBM page contains the configuration overview of the access options of the device.
Specify the services that access the device. With some services, there are further configuration
pages on which more detailed settings can be made.
The standard port can also be changed for your own services.
Note
Change standard port
Some programs can only access the service over the standard port, e.g. TIA Portal accesses
HTTPS over standard port 443. Before you change the port, check which port the program
uses. When you change the standard port, you must access the service over the changed port.
Firewall
The firewall is reinitialized after the ports are changed. This means that the changed ports are
applied in the firewall rules. Existing connections, e.g. via the user-specific firewall, can be used
with restrictions during this time.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08
Configuring with Web Based Management
4.5 "System" menu
113