Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 269

● Issuer DN
Shows the name of the certificate issuer.
● Subject Alternate Name
If it exists, an alternative name of the applicant is displayed.
● Issue Date
Shows the start of the period of validity of the certificate
● Expiry Date
Shows the end of the period of validity of the certificate.
● Serial Number
Shows the serial number of the certificate.
● Used
Shows which function uses the certificate.
● Crypto Algorithm
Shows which cryptographic method is used.
● Key Usage
Shows the purpose that the key belonging to the certificate is used for, e.g. to verify digital
signatures.
● Extended Key Usage
Shows whether the purpose is additionally restricted, e.g. only to verify signatures of the CA
certificate.
● Key File
Shows the key file.
● Certificate Revocation List 1st URL
Enter the URL with which the revocation list can be called up. Can only be edited if
supported by the certificate.
● Certificate Revocation List 2nd URL
Enter an alternative URL. If the revocation list cannot be called up using the 1st URL, the
alternative URL is used. Can only be edited if supported by the certificate.
● Certificate
Shows the name of the certificate.
● Passphrase
Enter the password for the certificate. Can only be edited if the encrypted file is password
protected.
● Passphrase Confirmation
Enter the password again. Can only be edited if the encrypted file is password protected.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08
Configuring with Web Based Management
4.9 "Security" menu
269