Preface - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Preface

Scope of the manual
This Configuration Manual covers the following product:
● SCALANCE S615
This Configuration Manual applies to the following software version:
● SCALANCE S615 firmware as of version V 6.2
Purpose of the Configuration Manual
This Configuration Manual is intended to provide you with the information you require to install,
commission and operate the device. It provides you with the information you require to
configure the devices.
New in this edition
● Personalized welcome message
● Search function in the help pages
● Security overview: Display of SSH fingerprints MD5 and SHA256
● Port can be configured for HTTP, HTTPS, Telnet, SSH and SNMP
● Password-protected loading and saving of Config and Config Pack
● DHCP client on all devices
● DHCP: Configuration limits for static IP addresses expanded to 128 per pool
● Events extended by firewall
● Support for TLS-based Syslog
● Connection Check
● Schedule restart
● NETMAP rules editable; bidirectional rules; auto firewall rules
● User-specific firewall rules combinable with the "Digital input" event
● Pre-defined IPv4 rule for VRRP; interface extended by VPN connections
● IPsec: Subnet lists can be used for connections and for remote endpoints
● SINEMA RC, IPsec, OpenVPN: Closing of an unused VPN tunnel after a configurable time
has elapsed.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08
3