Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 261

Description
The page contains the following:
● Current User
Shows the user that is currently logged in.
● Current User Password
Enter the password for the currently logged in user.
● User Account
Select the user whose password you want to change.
● Password Policy
Shows which password policy is being used when assigning new passwords.
– High
– Low
● New Password
Enter the new password for the selected user.
The following characters are not permitted: § ? " ; : ß \
Note
When you log in for the first time or log in after a "Restore Factory Defaults and Restart", you
will be prompted to change the predefined password "admin". You can also rename the
"admin" user preset in the factory once. Afterwards, renaming "admin" is no longer possible.
The factory setting for the password when the devices ship is as follows:
● admin: admin
Note
Changing the password in Trial mode
Even if you change the password in Trial mode, this change is saved immediately.
● Password Confirmation
Enter the new password again to confirm it.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08
Password length: at least 8 characters, maximum 128 characters
At least 1 uppercase letter
At least 1 special character
At least 1 number
Password length: at least 6 characters, maximum 128 characters
Configuring with Web Based Management
4.9 "Security" menu
261